OWNER ANSWER
How to reset BYD settings safely
For a frozen display, use the documented screen restart before considering Factory Reset. On the original SEAL, with infotainment already on, hold the physical centre-console scroll button for three seconds. A factory reset restores infotainment settings and is a separate operation; use the matching model guide below for other cars.

- Identify whether the problem is with the display or a particular setting.
- For an unresponsive screen, follow the normal display-restart guide for your model. On the original SEAL, hold the centre-console scroll button for three seconds. Safety note: Wait until an OTA installation has finished before restarting or resetting. A factory reset may erase configuration; if one has started, do not operate the touchscreen or interrupt the power supply.
- Test the original function after the home screen has loaded.
- If BYD support recommends a full reset, read the car’s confirmation screen and check which settings and access methods will be removed before confirming.
- If you proceed with the original SEAL factory reset, allow the handbook’s two to five minutes for completion without operating the touchscreen. Follow the actual completion prompt before setting up the functions again.
What to expect
After a normal display restart, the home screen loads and the original function responds. A full factory reset is a separate support-directed action and may remove configuration.
If that did not work
- The display reloads but the original fault remains: note which function fails and any exact error. Ask BYD to check that function and the full infotainment software version before trying a factory reset.
- The display will not restart using its documented control: give BYD the model, software version if available, and whether the screen is blank, frozen or repeatedly restarting. Ask for the correct next diagnostic step for that system.
- A factory reset has already started but appears stuck: leave the power supply uninterrupted and ask BYD for instructions with the elapsed time and screen message.
- Brake, steering, airbag or high-voltage warnings are present: follow the handbook response for that warning; a settings reset is not the relevant repair.
Restart or factory reset?
A restart closes and reloads the display system without intentionally erasing preferences. Restoring settings is a separate operation. BYD Europe’s FAQ calls Settings → Version → Factory Reset a “soft reset”, but the vehicle manuals describe an infotainment factory reset; treat it as a reset that may erase settings.
Related links
Source: BYD UK official source · BYD FAQ: restart/reset wording. Checked 22 October 2026.
Restart control and factory-reset timing checked 13 November 2026 against the original SEAL EN-250305 handbook, PDF 151 (BYD UK). These timings are not a universal instruction for every BYD model.