01 · EQUIPMENT & LOAD
What power limit applies?
No AC appliance-output ceiling has been established from these reviewed pages for your exact adapter. Do not substitute a limit from another BYD model. Confirm the vehicle and adapter limits with BYD and check the adapter’s rating and instructions.
Check the appliance’s requirements, including starting demand, against the compatible equipment. There is no kettle/air-fryer compatibility calculator here.
02 · BEFORE USE
Battery level is only one condition
The selected edition requires at least 15% battery state of charge before discharging. It recommends using V2L at a high charge level and warns of restricted operation at low charge.
This is a pre-use condition, not a verified automatic cut-off setting. Allow for the driving range you still need.
Keep the load switched off before starting. Do not use damaged equipment, or a port with water, foreign material, damaged terminals or corrosion. Follow the full source checks and connection sequence.
03 · IMPORTANT WARNINGS
Read before connecting
Do not touch the metal terminals during discharge. Stop immediately if there is unusual smell, smoke or another abnormality. Protect the equipment from being driven over, dropped or trampled on; keep it away from the boot, beneath the vehicle’s front and the tyres during use.
The handbook’s charging-equipment precautions also apply. These selected warnings do not replace the complete safety instructions.
04 · FINISHING
Your model’s stopping instructions
The handbook’s sequence disconnects the load before removing the discharge equipment, then closes the port and stores the equipment. Read the exact source for unlocking and equipment-specific controls; do not force a locked connector.