ATTO 3 owner’s manual UK

Light mist and a noticeable amount of water are different. The ATTO 3 2024 RHD handbook EN-240801 explains that moisture can condense inside ventilated lights after rain, washing or temperature changes; this alone does not establish a fault.

The handbook says light fog can clear during ordinary use with the appropriate lights on. Do not make a test drive if lighting is ineffective or conditions are unsafe. A noticeable amount of water calls for attention from a BYD authorised repairer.

While parked, record which lamp is affected, whether it is mist or visible water, and whether the light works. Ask your repairer for advice before travelling if a light fails or safety is uncertain. Do not open, heat or modify the lamp to dry it.

• Check the exact warning symbol or menu wording shown by the vehicle. • Use the charging, recovery, towing and emergency limits for the fitted UK vehicle—not another BYD model. • Keep a downloaded official copy available for places with poor reception, and replace it when BYD publishes a newer revision. • For practical guides organised around this car, continue to the BYD ATTO 3 owner hub.

MyBYD links to BYD UK's current manual library instead of storing an ageing duplicate. Use the manufacturer page to select the document for your vehicle.

• Confirm your exact model and model year before choosing a document. • Open the official BYD UK manual library and choose the matching vehicle. • Check the document's market, right-hand-drive applicability and revision. Do not assume a similarly named overseas model has the same controls. • Use the contents or document search to find the exact warning, control or task. Read the complete procedure, including its cautions, before taking action. • Keep the matching official document available for reference. Where it differs from general website guidance, use the instructions supplied for your own car.

Expected result: you have a manufacturer document that matches your vehicle and the task. If you cannot establish that match, ask an authorised BYD retailer for the correct document before following a safety-critical procedure.

For warnings, recovery, high-voltage systems or emergency procedures, the official vehicle documentation takes priority over owner commentary.

The BYD UK selector checked on 17 October 2026 lists ATTO 3 EVO but does not list the original ATTO 3. Do not select EVO as a substitute for an original car. The official original-ATTO-3 2024 RHD handbook EN-240801 linked below is a useful reference only if its edition and controls match your vehicle; keep your supplied handbook as the starting point. Search the PDF for the exact warning wording or use its contents, then read the complete section and cautions rather than a search snippet. If your model-year document is not listed or the controls differ, request the matching RHD edition from BYD UK with your model and model year. Send a VIN only through the authorised private support route if needed, never in a public comment. The existing lamp-moisture answer here specifically cites EN-240801 and does not authorise driving with ineffective lights.