SEALION 7 camera or 360° view unavailable

Step 1: check the SEALION 7 cameras

1. Stop and select Park before using camera menus.
2. Record the exact warning and select front, rear, left and right views separately.
3. Confirm the mirrors are deployed and doors and tailgate are fully closed.
4. Inspect the front, rear and mirror-mounted camera areas for water, dirt, ice or impact marks.
5. Clean carefully with normal vehicle-care materials; do not realign a camera.

Step 2: test after shutdown

1. Let the vehicle complete a normal shutdown and restart it while stationary.
2. Check each view again in a clear open space.
3. Compare straight bay markings across the stitched panels.

Interpret the display

• Blur disappears after cleaning: lens contamination was likely.
• A single sector stays dark: record which physical camera corresponds to it.
• Panels do not align: calibration may be wrong, often requiring inspection after body or mirror work.
• All views fail with another warning: record both messages and the complete software version.

Until it is repaired

Allow extra space and use a spotter where necessary; never use a distorted image to judge a close obstacle. Recurrent black, frozen or misaligned views, visible camera damage or failure after repair needs authorised diagnosis rather than a settings reset.